Description
Addition Details:
Curves
Applications
- Waste water.
- Sump drainage.
- Flood control.
- Dewatering for fish pond or basement and cellars.
A/AN Series – Submersible Wastewater / Sump Pumps
A/AN Series – Submersible Wastewater / Sump Pumps
Description :
- A precision manufactured motor is achieved by utilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling, and stator winding impregnated with varnish that is heat dried in an industrial oven. The Water Resistance for Pump can reach IP68 Grade.
- HCP’s professional assembly line, complimented with a synthesized production test, ensures the highest level of pump quality.
- Standard accessories include : cable with an epoxy resin sealed water-resistant cable base, Auto-cut Protector, dual mechanical seals and lip seal design.
- The A-05A is an extremely practical pump, with a low temperature, oil filled motor and single seal design (CA/CE).
You must be <a href="https://fqg.com.my">logged in</a> to post a review.
Related products
-
IC Series – Submersible Dewatering Pumps
Description :Read more- Standard design incorporating : cable and dry motor equipped with thermal Auto-Cut prevent motor from over heating. Abrasion resistant double mechanical seal and additional oil seal.
- Superior design of water cooled motor to ensure long life operation with high efficiency and energy savings.
- For above or below surface water applications the IC pump strainer can be easily removed and replaced with a check valve, which allows for de-watering of underground water applications.
IC Series - Submersible Dewatering Pumps -
SF/SA Series – Submersible Stainless Steel Pumps
Description :Read more- Best structure design, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protector, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals.
- The Stainless series is suitable for all light acid, corrosive and/or sea water application fluid in pH value between 4~10pH. For Strong Acidity and Alkalinity applications, please use the specified chemical pump.
- Investment Casting Precision casting with the use of an advanced stainless investment casting method, that produces the highest quality with a smooth surface finish.
- Viton O-ring Viton O-rings are used throughout the pump to give better pump life in corrosive acid and aggressive media.
- Austenitic Stainless Steel(SUS300 series)is used in SF/SA series. SUS316/SCS14 is better than SUS304/SCS13 in water application of light acid-base.
SF/SA Series - Submersible Stainless Steel Pumps -
L Series – Submersible Large Volume Pumps
Description :Read more- Large flow capacities achieved with almost no vibration, or noise, by use of the axial and mix flow design.
- HIGH-QUALITY BRONZE : Widely acclaimed for its ability to withstand corrosion, even to the erosion of sea water and brine and is proved to be able to substantially extend time to service,used on the Upper Cover, Bearing Bracket, & M. Seal Bracket of our pumps. (L-200/250/300A only)
- POWER-SAVING & HIGH-EFFICIENCY ALBC3 (Aluminum Bronze) IMPELLER : Utilizes wear-resistant and anti-corrosion ALBC3 (Aluminum Bronze) Impeller, the same material as the propellers of boats and vessels.
- Robust construction and compact design with a dry motor, double mechanical seals and impeller flow guide vane for high efficiency.
- Pump manufactured with heavy duty housing, cable leads are isolated by hardened epoxy for water proofing, and double mechanical seals.
- High solids, epoxy coating prolongs metals from corrosion and oxidization.
- L Series are equipped with Sacrificial Anode. Sacrificial Anode are create from a metal alloy with a more negative electrochemical potential. Sacrificial Anode are highly active metals, that are used to prevent pump material surface from corroding.
L Series - Submersible Large Volume Pumps
Reviews
There are no reviews yet.