Float Switch

Float Switch

Description :

  • CE Certificated.
  • In 3-wire SPDT version, normally open for pump down and normally closed for pump up.
  • Non-toxic, corrosion resistant, polypropylene float housing.
  • Includes an innovative one-piece fixed weight for mounting; no clip to lose.
  • Mechanically-activated, snap action contact, wide-angle pump switch designed for preference and dependability.
  • Waterproof Epoxy Treatment. The float switch cable is fortified by Epoxy resin to strengthen its waterproof capability. This reinforcement can effectively prevent water and moisture intrusing in the float switch through the cable and will substantially extend the life expectancy of the float switch.

Float Switch

Category:

Description

Addition Details:

Specifications

Cable :

  • PVC cable H05VV-F (generally environment used)
  • Flexible rubber cable H07RN-F (cold environment used) 1mm², 3 conductors.
  • Cable length optional : 3M, 5M, 10M, others.

Float :

  • Non-toxic, corrosion resistant polypropylene housing for use up to 50oC (122oF)

Electrical :

  • Type Of Load R-M = Resistance-Motor Load
  • 250 VAC Rated Voltage
  • Maximum Pump Running Current : 10(8) amps
  • Frequency : 50/60 Hz
  • Micro Disconnect Automatic Life Cycles : 50,000 times.

Protection Rating :

  • Ip68

Applications

Reviews

There are no reviews yet.

Be the first to review “Float Switch”

Related products

  • GF Series – Submersible Grinder Pumps

    Description :
    • Durable heavy duty finned cast iron construction.
    • Standard accessories include : epoxy resin cable base, dry motor, double mechanical seals, autocut protection, double ball bearing support shaft and rotor.
    • Vortex impeller design prevents clogging by cutting up articles.
    • Radial cutter and cutter ring : corrosion resistant material, hardened to 55-60 Rockwell C.
    •  Models with float : 32GF type - 1.3 & 2 & 3HP
    GF Series - Submersible Grinder Pumps
    Read more

  • F/FN Series – Submersible Sewage / Effluent Pumps

    Description :
    • A precision manufactured motor is achieved by utilizing the highest standard of quality control. All rotors adopt heat treatment methods for drive shaft assembling, and stator winding impregnated with varnish that is heat dried in an industrial oven. The Water Resistance for Pump can reach IP68 Grade.
    • HCP's professional assembly line, complimented with a synthesized production test, ensures the highest level of pump quality.
    • Standard accessories include : cable with an epoxy resin sealed water-resistant cable base, Auto-cut Protector, dual mechanical seals and lip seal design.
    F/FN Series - Submersible Sewage / Effluent Pumps
    Read more

  • L Series – Submersible Large Volume Pumps

    Description :
    • Large flow capacities achieved with almost no vibration, or noise, by use of the axial and mix flow design.
    • HIGH-QUALITY BRONZE : Widely acclaimed for its ability to withstand corrosion, even to the erosion of sea water and brine and is proved to be able to substantially extend time to service,used on the Upper Cover, Bearing Bracket, & M. Seal Bracket of our pumps. (L-200/250/300A only)
    • POWER-SAVING & HIGH-EFFICIENCY ALBC3 (Aluminum Bronze) IMPELLER : Utilizes wear-resistant and anti-corrosion ALBC3 (Aluminum Bronze) Impeller, the same material as the propellers of boats and vessels.
    • Robust construction and compact design with a dry motor, double mechanical seals and impeller flow guide vane for high efficiency.
    • Pump manufactured with heavy duty housing, cable leads are isolated by hardened epoxy for water proofing, and double mechanical seals.
    • High solids, epoxy coating prolongs metals from corrosion and oxidization.
    • L Series are equipped with Sacrificial Anode. Sacrificial Anode are create from a metal alloy with a more negative electrochemical potential. Sacrificial Anode are highly active metals, that are used to prevent pump material surface from corroding.
    L Series - Submersible Large Volume Pumps
    Read more